Sew OrgaNiced media holder

➤ SIZE (L x W x H) | 10.5 x 8.2 x 2.9 cm

➤ SCOPE OF DELIVERY | 1 media holder, consisting of 3 individual parts: 2 x supports with hooks, 1x rotating safety part

➤ MATERIAL | The 3D printed products are made of modified polyethylene terephthalate (PET-G for short). This is a thermoplastic that most people know from PET bottles. It is stable, dirt-resistant and can be used safely in the home with children.

➤ CARE | The 3D printed products are made of robust PET-G plastic. This material is not only stable and very durable, it is also dirt-repellent and waterproof, making it easy to clean. It is usually sufficient to dust the products with a slightly damp cloth. If they are very dirty, you can simply rinse our Skadis perforated plate accessories with a little detergent and lukewarm water.

➤ ASSEMBLY | First, place the two lower parts by guiding the upper hook through the holes in your SKADIS plate and then carefully but firmly pressing the lower hook into the recess.
Before you attach the upper part, you should use your cell phone, tablet or other medium to check where the best place to place the safety device is. Then, again, guide the two hooks of the holder through the recesses in the perforated plate and press the holder down carefully but firmly. If necessary, it can help to press the sides down alternately to better distribute the load.

➤ DISMANTLING | For disassembly, we also recommend the "zig-zag" upward movement so that the bracket comes off more easily.

➤ Can I use the media holder for any tablet?
Yes, the media holder is designed to accommodate tablets of any size in both portrait and landscape mode.

➤ Can I also use the media holder for books or notepads?
Yes, the holder is also perfect for books and pads so that you can easily read your sewing steps at any time.

➤ Can I adjust the angle of the holder?
Yes, the lower supports offer two different angles so you can easily adjust the tilt angle that suits you.